Air-brake cables were used to determine feasibility and length needed
Date: 11/27/2013
Views: 4249
OK, we are ready for in situation fitting to get correct length and angle of 1" tube
Date: 11/27/2013
Views: 3196
IM002773
Date: 10/30/2007
Views: 4005
Newest Image
EAA SITE
Date: 08/23/2023
Views: 95455
Most Viewed Image
Wing fillet fairing
Date: 05/23/2007
Views: 535350
Wing connector 1.
Putting together an 8 conductor, 3 station pneumatic modular connector using my favorite Anderson powerpole modular connectors (McMaster carries them) and mutilated Festo KSV-5 pneumatic connector (Cumulus soaring sells under Winter).
Managed to maintain detent (screw).
Will get some Redux/glass to better bond top and bottom together and a tube to tether from a small bungee. Will seal wire end with non corrosive clear silicone.
Used Bridgeport milling machine to mutilate Festo connector with 2 flute 1/2" cutter.
Top bonded to bottom with JB KWIK weld.
Anderson powerpole connectors held together with model aeroplane CA, (they are tongue and groove).
Y9-04-28