|
I bored this 5/8" Stainless Lock Washers to .785", 11/16" is a wierd size that McMaster didn't offer
Date: 12/16/2013
Views: 3984
|
|
|
Prior to work Y13-12-15 (compare to prior pic)
Date: 12/13/2013
Views: 3902
|
|
|
Front Cable Mount with Lever in Down Position
Date: 12/12/2013
Views: 3369
|
|
|
Action of Front Cable Mount mov.
Date: 12/13/2013
Views: 2286
|
|
|
You can see the pillow block is aft of the threads
Date: 12/13/2013
Views: 3969
|
|
|
Aft mount
Date: 12/13/2013
Views: 3369
|
|
|
The magic number is 1.990" from the forward pillow block bearing to the grove.
Date: 12/13/2013
Views: 3793
|
|
|
Clevis Fork dimensions after material removal
Date: 12/16/2013
Views: 3796
|
|
|
1/2" ball end-mill on order (McMaster) to to mill a pocket in the brake master cylinder directly above the mounting holes
Date: 12/13/2013
Views: 3778
|
|
|
Emergency Maneuver that starts with Heim? 8 of 13
Date: 12/16/2013
Views: 3692
|
|
|
Using fore and aft the supplied by Europa for push-rod jam nuts that are .155" thick
Date: 12/13/2013
Views: 3131
|
|
|
The threaded portion of my "thunk" fits nicely inside this spacer
Date: 12/13/2013
Views: 3452
|
|
|
1/2" clamps that allow cable to slide 1 of 2
Date: 12/16/2013
Views: 4715
|
|
|
Cable Happy near Fuel Selector and below Air-Brake Cable 1
Date: 12/12/2013
Views: 3347
|
|
|
I'm going to Redux the nut in place and Redux/Flox the thread extender hang-over
Date: 12/13/2013
Views: 3382
|
|
|
Front Cable Mount with Lever in Up Position
Date: 12/12/2013
Views: 3583
|
|
|
Mill round slot in master cylinder 2 of 2
Date: 12/24/2013
Views: 6564
|
|
|
Action of Flap Cross Tube .mov
Date: 12/13/2013
Views: 2506
|
|
|
Emergency Maneuver that starts with Heim? 2 of 13
Date: 12/16/2013
Views: 4129
|
|
|
Pretty much the front is flight ready.
Date: 12/16/2013
Views: 5045
|
|