|
DSC00158
Date: 09/03/2015
Views: 10798
|
|
|
IMG_0191[1]
Date: 09/12/2015
Views: 7655
|
|
|
IMG_0231
Date: 01/31/2014
Views: 8614
|
|
|
Ipad 039
Concrete base for 20ft x 10ft shed
Date: 03/22/2014
Views: 6800
|
|
|
IMG_0235
Date: 02/01/2014
Views: 8027
|
|
|
IMG_0404
Date: 04/17/2015
Views: 8290
|
|
|
DSC00228
Had to remove more of the rudder than I wanted so build up rudder trailing edge by attaching peel ply to the outside of the rudder and build up trailing edge using flox around the edge and an initial 2 ply of bid. i'll apply an additional 2 ply after the
Date: 09/10/2015
Views: 7137
|
|
|
DSC00157
Instructions state that rod should be reamed to 0.375" but it needed to be reamed out 0.428" to fit push rod.
Date: 09/03/2015
Views: 7443
|
|
|
DSC00149
Winch installed in garage
Date: 09/01/2015
Views: 9154
|
|
|
IMG_0340[1]
cloth cabinet installed.
Date: 09/04/2014
Views: 11959
|
|
|
IMG_0414
Date: 04/18/2015
Views: 9228
|
|
|
IMG_0390
Date: 04/10/2015
Views: 7501
|
|
|
Ipad 041
Shed Under construction
Date: 03/27/2014
Views: 7538
|
|
|
IMG_0237
Fuselage in the truck
Date: 02/01/2014
Views: 8347
|
|
|
Torque tube
Took some measurements and sent query to Europa. Response was I required the issue 1 TP38s
Date: 09/03/2015
Views: 4894
|
|
|
IMG_0230
Date: 01/31/2014
Views: 8052
|
|
|
IMG_0412
Date: 04/17/2015
Views: 8148
|
|
|
IMG_0251
Kit safely in Storage.
Date: 02/01/2014
Views: 7927
|
|
|
IMG_0821
Trial fitted the torque tube but it looks like the TP38 bearing is too short!
Date: 09/03/2015
Views: 6644
|
|
|
IMG_0417
Date: 04/22/2015
Views: 8105
|
|