|
DSCN4666small
Date: 08/27/2006
Views: 3329
|
|
|
LongRangeTank
Date: 07/31/2004
Views: 4314
|
|
|
3_snaps
The original snap base hardware is on the right. The new snap bases and mounting hardware are on the left. These 6-32 screw mount snap bases are from McMaster-Carr. I used big ol' AN970 washers for more support underneath and nyloc nuts so they don't c
Date: 06/23/2011
Views: 3560
|
|
|
IMG_6787small
Date: 02/23/2008
Views: 2710
|
|
|
Mod70_10Ann
Date: 07/20/2005
Views: 3063
|
|
|
2_snaps
When the tab on the back of the pilot cushion was pulled to remove it, the snap bases pulled through the screw head and remained in the snaps. You should be able to see the snap bases in the snaps in this picture.
Date: 06/23/2011
Views: 3827
|
|
|
Plexi01small
Date: 04/04/2005
Views: 2903
|
|
|
IMG_6967post
Starboard side juncture of main beam with cross beam.
Date: 12/27/2009
Views: 2549
|
|
|
IMG_1236ann
The new pump is rated at 50 psi output.
Date: 06/21/2010
Views: 3140
|
|
|
InsideClosed
Date: 07/09/2003
Views: 6545
|
|
|
IMG_1087ann
Then problem #2 - bolts that held the cover plate in place wouldn't fit into the space provided on the pump.
Date: 04/03/2010
Views: 3104
|
|
|
IntercoolerPg2
Date: 01/07/2006
Views: 3830
|
|
|
IntercoolerFig2
Date: 01/07/2006
Views: 3015
|
|
|
Airmaster01small
Date: 09/29/2005
Views: 3165
|
|
|
IMG_0919post
Some pics after the engine run-up and taxi tests today.
Date: 07/01/2010
Views: 2557
|
|
|
Seat_Back
Date: 04/19/2006
Views: 3849
|
|
|
IMG_2857
Date: 12/03/2008
Views: 3099
|
|
|
DSCN6089Ann
Date: 06/12/2007
Views: 3237
|
|
|
Condition Inspection P3 T
Date: 02/04/2010
Views: 2918
|
|
|
IMG_0046post
Button the cowl and tidy things up. Looked out the door (West) and the weather was calm, not many 150's in the pattern. Looks like a great time to go and try it out. Filthy from the elbows to the finger tips so I have to hit the WC and clean myself bef
Date: 07/08/2010
Views: 2991
|
|