|
Photo_051307_010
Date: 05/13/2007
Views: 2340
|
|
|
MG_2907
Date: 03/17/2008
Views: 3277
|
|
|
IMGA0588
Date: 03/29/2013
Views: 6452
|
|
|
Seam holes filled 1.
Date: 05/03/2009
Views: 3048
|
|
|
IMG_0126
Date: 04/14/2005
Views: 3205
|
|
|
NiMh Delta Peak charger 2.
Date: 07/24/2003
Views: 3855
|
|
|
DSCN5717Ann
Date: 04/06/2007
Views: 3034
|
|
|
TailplaneBearings04
Date: 12/21/2003
Views: 2714
|
|
|
139_3912
Date: 12/31/1969
Views: 4769
|
|
|
IMG_1605
Date: 06/08/2004
Views: 3425
|
|
|
Filled with Aeropoxy light port.
Date: 09/03/2009
Views: 3473
|
|
|
IMG_3391em
Input fuel pressure: 5 lbs. Just like with the Billet pump. Next request was for a fuel flow test. Reconnected the Billet pump to the fuel circult. One electric pump running fuel through the billet pump produced 1 gallon of fuel in a bit less than 3 m
Date: 07/09/2012
Views: 5606
|
|
|
DSCN6198Ann
Date: 07/04/2007
Views: 3661
|
|
|
2012-08-18_19-58-15_689
Port side. Red highlighted area shows area with little reinforcement on inside. This is before I did the belly layup per the manual.
Date: 08/19/2012
Views: 9717
|
|
|
DSCN5423
Date: 07/18/2009
Views: 2990
|
|
|
PitotStaticTubeBrokesml
Date: 06/19/2004
Views: 3062
|
|
|
Gear and door warning piezo horn 2.
Date: 06/08/2010
Views: 3091
|
|
|
ALFRED UPSTOP 2
Date: 02/16/2015
Views: 7114
|
|
|
Rod end clevis fork ground down to 1.975" (again minimum 9.5 threads of engagement)
Date: 12/13/2013
Views: 4587
|
|
|
Fuel_System_12
Date: 01/23/2006
Views: 3765
|
|