|
|
Supplied nuts are too thick for the thin side of the tang 1.
Date: 10/14/2009
Views: 4745
|
|
|
Supplied nuts are too thick for the thin side of the tang 2.
Date: 10/14/2009
Views: 5172
|
|
|
4 nuts sanded down to .125"
Date: 10/14/2009
Views: 5262
|
|
|
This is the gap at high point on port door.
Date: 10/15/2009
Views: 5696
|
|
|
Gave the top of door a bit more clearance to fuse.
Date: 10/16/2009
Views: 5572
|
|
|
Port front tang perfect length.
Date: 10/16/2009
Views: 5446
|
|
|
Port front tang rebate prepared for closing gap a bit.
Date: 10/16/2009
Views: 5605
|
|
|
Port front tang rebate, going to use thin G-10 to cover gap.
Date: 10/16/2009
Views: 5521
|
|
|
Port front tang gap cover shaped.
Date: 10/16/2009
Views: 5900
|
|
|
Port front gap cover floxed in place.
Date: 10/16/2009
Views: 5678
|
