|
|
Supplied nuts are too thick for the thin side of the tang 1.
Date: 10/14/2009
Views: 4658
|
|
|
Supplied nuts are too thick for the thin side of the tang 2.
Date: 10/14/2009
Views: 5096
|
|
|
4 nuts sanded down to .125"
Date: 10/14/2009
Views: 5165
|
|
|
This is the gap at high point on port door.
Date: 10/15/2009
Views: 5585
|
|
|
Gave the top of door a bit more clearance to fuse.
Date: 10/16/2009
Views: 5470
|
|
|
Port front tang perfect length.
Date: 10/16/2009
Views: 5343
|
|
|
Port front tang rebate prepared for closing gap a bit.
Date: 10/16/2009
Views: 5516
|
|
|
Port front tang rebate, going to use thin G-10 to cover gap.
Date: 10/16/2009
Views: 5425
|
|
|
Port front tang gap cover shaped.
Date: 10/16/2009
Views: 5806
|
|
|
Port front gap cover floxed in place.
Date: 10/16/2009
Views: 5575
|
