Eric Engineering torque wrench extension

View Slideshow (Fullscreen)

Airmaster CS prop.

1. Airmaster... 2. Airmaster... 3. Airmaster... 4. Airmaster... 5. Eric...

Random Images

Oops, a few air bubles on aft mount reinforcemelay-up, drilled holes, filled with Aeropoxy, plugged with dry flox and Peel-Ply

Date: 11/30/2013 Views: 8839

IMG_6282post

Date: 08/09/2009 Views: 6053

14092002185614_G

Date: 12/31/1969 Views: 3839

Newest Image

EAA SITE

Date: 08/23/2023 Views: 816858

Eric Engineering torque wrench extension

Since I had Eric's attention, I had him run calculations for putting an extension arm on a torque wrench.
I believe you need to do this to tighten Airmaster mounting bolts.
Bottom line is if you put torque wrench at 90 degrees to the extension, you can read exact values on the wrench. Length of arm will not affect reading.

Y13-12-02

Date: 12/03/2013

Size:
Full size: 4896x3672

first previous

Eric Engineering torque wrench extension

Photo Properties

summary details

Make	SONY	Model	DSC-HX20V
Aperture Value	f/3.2	Color Space	sRGB
Exposure Bias Value	0 EV	Exposure Program	Program
Flash	No Flash	Focal Length	4.45 mm
ISO	125	Metering Mode	Multi-Segment
Shutter Speed Value	1/30 sec	Date/Time	Mon 02 Dec 2013 05:45:47 PM UTC
Orientation	Normal (O deg)	Resolution Unit	Inch
X Resolution	350 dots per ResolutionUnit	Y Resolution	350 dots per ResolutionUnit
Compression	Jpeg Compression	Brightness Value	3.6734375
Contrast	0	Exposure Mode	0
Saturation	0	Scene Type	Directly Photographed
Sharpness	0

first previous