Mill round slot in master cylinder 11 of 12

PUSH-PULL CABLE DETAIL: FRONT CABLE ATTACHMENT

1. Steel for... ... 18. Mill round ... 19. Mill round ... 20. Mill round ... 21. Mill round ... 22. Mill round ... 23. Front... 24. Front... ... 33. Front...

Random Images

DSCN5264Ann

Date: 12/17/2006 Views: 5402

WingSet46Ann

Date: 07/23/2004 Views: 4447

IMG_5614

Date: 10/28/2013 Views: 9505

Newest Image

EAA SITE

Date: 08/23/2023 Views: 819949

Mill round slot in master cylinder 11 of 12

Except for paint flight ready!

Note:
You need washers between the body of the master cylinder and the tunnel so you don't squish the dust seal. The manual calls for one wide area washer against the tunnel and two smaller washers on each hole. I will be using just one wide area washer and one smaller washer (seal still clears tunnel).

Y13-12-23

Date: 12/24/2013

Size:
Full size: 4896x3672

next last

first previous

Mill round slot in master cylinder 11 of 12

Photo Properties

summary details

Make	SONY	Model	DSC-HX20V
Aperture Value	f/3.2	Color Space	sRGB
Exposure Bias Value	0 EV	Exposure Program	Program
Flash	No Flash	Focal Length	4.45 mm
ISO	640	Metering Mode	Multi-Segment
Shutter Speed Value	1/30 sec	Date/Time	Mon 23 Dec 2013 05:39:39 PM UTC
Orientation	Normal (O deg)	Resolution Unit	Inch
X Resolution	350 dots per ResolutionUnit	Y Resolution	350 dots per ResolutionUnit
Compression	Jpeg Compression	Brightness Value	1.76328125
Contrast	0	Exposure Mode	0
Saturation	0	Scene Type	Directly Photographed
Sharpness	0

next last

first previous