Trying not to mar flap cross tube too bad with Upstops 2 of 7

Flap drive pin, upstops, extension and flap drive.

1. Flap drive ... ... 47. Flap... 48. Flap... 49. Trying not ... 50. Trying not ... 51. Trying not ... 52. Trying not ... 53. Trying not ... ... 58. Mounting...

Random Images

Mounting UpStops 2

Date: 12/27/2013 Views: 9738

GJ7I2378

Date: 07/09/2006 Views: 4434

DSCF0023_001

Date: 09/08/2009 Views: 7343

Newest Image

EAA SITE

Date: 08/23/2023 Views: 693379

Trying not to mar flap cross tube too bad with Upstops 2 of 7

I turned down the OD from .500" to .425" and thinned the back side of the washer (couldn't face the outboard side because that's where the weld is) to ~ .050". I needed to thread the portion of the washer I removed to allow it to screw tight against my thinned nut (welded to the stud plate).

I didn't have any 9/16" Nylon 6/6, or I would have left the OD .500". I had .500" Nylon 6/6 laying around, so I turned down OD of screw to .425" (leaving .0375" of material outboard of Nylon 6/6 pocket).

Y13-12-26

Date: 12/26/2013

Size:
Full size: 4896x3672

next last

first previous

Trying not to mar flap cross tube too bad with Upstops 2 of 7

Photo Properties

summary details

Make	SONY	Model	DSC-HX20V
Aperture Value	f/3.2	Color Space	sRGB
Exposure Bias Value	0 EV	Exposure Program	Program
Flash	No Flash	Focal Length	4.45 mm
ISO	160	Metering Mode	Multi-Segment
Shutter Speed Value	1/30 sec	Date/Time	Thu 26 Dec 2013 01:11:55 AM UTC

next last

first previous