Trying not to mar flap cross tube too bad with Upstops 6 of 7

Flap drive pin, upstops, extension and flap drive.

1. Flap drive ... ... 51. Trying not ... 52. Trying not ... 53. Trying not ... 54. Trying not ... 55. Trying not ... 56. Mounting... 57. Mounting... 58. Mounting...

Random Images

DSCN5225

Date: 11/29/1999 Views: 6359

IMG_1560

Date: 06/07/2004 Views: 5462

dscn1802

Date: 12/31/1969 Views: 4976

Newest Image

EAA SITE

Date: 08/23/2023 Views: 831870

Trying not to mar flap cross tube too bad with Upstops 6 of 7

After applying 638 to hole and screw, I held the threaded portion of the screw in my 6 jaw chuck on the lathe, then gave it a good tightening.

The heads of all screws are below the surface of the Nylon 6/6.

Y13-12-26

Date: 12/26/2013

Size:
Full size: 4896x3672

next last

first previous

Trying not to mar flap cross tube too bad with Upstops 6 of 7

Photo Properties

summary details

Make	SONY	Model	DSC-HX20V
Aperture Value	f/3.2	Color Space	sRGB
Exposure Bias Value	0 EV	Exposure Program	Program
Flash	No Flash	Focal Length	4.45 mm
ISO	125	Metering Mode	Multi-Segment
Shutter Speed Value	1/30 sec	Date/Time	Thu 26 Dec 2013 01:36:51 AM UTC
Orientation	Normal (O deg)	Resolution Unit	Inch
X Resolution	350 dots per ResolutionUnit	Y Resolution	350 dots per ResolutionUnit
Compression	Jpeg Compression	Brightness Value	3.28671875
Contrast	0	Exposure Mode	0
Saturation	0	Scene Type	Directly Photographed
Sharpness	0

next last

first previous