This is the printer part showing the parts in place.
Date: 04/03/2016
Views: 11824
dsc08965
Date: 10/01/2012
Views: 8685
CH18_30
Date: 12/31/1969
Views: 2587
Newest Image
EAA SITE
Date: 08/23/2023
Views: 104055
IMG_5106
I donĀ“t want to trim the door much further to save the aerodynamics. First I try hot air to bend the upper part of the door slightly. Limited success. In the the end I put opposing 45 degree edges on both door and rebate which provides the necessary clearance without making the gap much wider.