09 Put the top back on.

Mount with WebDAV RSS Feed for this Album View Latest Updates View Popular Items View Random Items View Slideshow (Fullscreen)

Fuel Tank Replacement

1. 01 Looking ... ... 4. 04 The Leak 5. 05 Fitting ... 6. 06... 7. 07 Plumbing... 8. 08 Leak... 9. 09 Put the ... 10. 10 Sight...

Random Images

InstrumentPanel74Ann

Date: 04/21/2005 Views: 4516

IM002182

Date: 10/30/2007 Views: 7209

110_1045_IMG_001

Date: 03/02/2004 Views: 6296

Newest Image

EAA SITE

Date: 08/23/2023 Views: 708756

09 Put the top back on.

This effort actually started before the final installation of the fuel tank. Fiberglass & epoxy strips had to be made up and bonded to the inside of the unit. Everything (tank, top, strips, sight gage, etc.) had to be fitted and placed to make sure the top went back on properly. The door sill had to be repaired. Upholstery had to be repaired and replaced. And, of course, there had to be some excitement in the hanger unrelated to the work.

Date: 07/14/2014

Owner: rlborger

Size: 22 items

next last

	IMG_7233 2-ply fiberglass strips were made up to be bonded to the inside of the unit. These strips went on all 4 sides. Here the strip is being bonded to the aft wall. Date: 01/26/2014 Views: 10263
	IMG_7235 A strip being bonded to the front wall. Date: 01/31/2014 Views: 8279
	IMG_7319 A test fit of the top. Check of the front. Date: 02/17/2014 Views: 8067
	IMG_7321 Checking the back. Date: 02/17/2014 Views: 10839
	IMG_7322 Checking the back. Date: 02/17/2014 Views: 10322
	IMG_7324 Checking the back. Looks like a good fit overall. Date: 02/17/2014 Views: 10594
	IMG_7365 Getting the sight gage plumbing in place. Date: 02/22/2014 Views: 10282
	IMG_7366 Applying the fiberglass/epoxy strips to the port side. Plastic wrap to prevent the epoxy from bonding to the tools used to hold the strip in place. Date: 02/22/2014 Views: 10266
	IMG_7367 Applying the fiberglass/epoxy strips to the starboard side. Date: 02/22/2014 Views: 8977
	IMG_7393 Shot bags (25 lbs each) to hold the top in place for the final bonding. 2 plies of fiberglass over a micro filler in the cut. Date: 03/01/2014 Views: 8746

next last