09 Put the top back on.

Mount with WebDAV RSS Feed for this Album View Latest Updates View Popular Items View Random Items View Slideshow (Fullscreen)

Fuel Tank Replacement

1. 01 Looking ... ... 4. 04 The Leak 5. 05 Fitting ... 6. 06... 7. 07 Plumbing... 8. 08 Leak... 9. 09 Put the ... 10. 10 Sight...

Random Images

Wheel fairing upside down 3 Kingsley

Date: 11/23/2010 Views: 5461

108_0803_IMG

Date: 10/07/2003 Views: 8321

IMG_3388

Date: 10/24/2010 Views: 7355

Newest Image

EAA SITE

Date: 08/23/2023 Views: 813314

09 Put the top back on.

This effort actually started before the final installation of the fuel tank. Fiberglass & epoxy strips had to be made up and bonded to the inside of the unit. Everything (tank, top, strips, sight gage, etc.) had to be fitted and placed to make sure the top went back on properly. The door sill had to be repaired. Upholstery had to be repaired and replaced. And, of course, there had to be some excitement in the hanger unrelated to the work.

Date: 07/14/2014

Owner: rlborger

Size: 22 items

next last

	IMG_7233 2-ply fiberglass strips were made up to be bonded to the inside of the unit. These strips went on all 4 sides. Here the strip is being bonded to the aft wall. Date: 01/26/2014 Views: 12582
	IMG_7235 A strip being bonded to the front wall. Date: 01/31/2014 Views: 10279
	IMG_7319 A test fit of the top. Check of the front. Date: 02/17/2014 Views: 10136
	IMG_7321 Checking the back. Date: 02/17/2014 Views: 13275
	IMG_7322 Checking the back. Date: 02/17/2014 Views: 12810
	IMG_7324 Checking the back. Looks like a good fit overall. Date: 02/17/2014 Views: 12976
	IMG_7365 Getting the sight gage plumbing in place. Date: 02/22/2014 Views: 12504
	IMG_7366 Applying the fiberglass/epoxy strips to the port side. Plastic wrap to prevent the epoxy from bonding to the tools used to hold the strip in place. Date: 02/22/2014 Views: 12617
	IMG_7367 Applying the fiberglass/epoxy strips to the starboard side. Date: 02/22/2014 Views: 11099
	IMG_7393 Shot bags (25 lbs each) to hold the top in place for the final bonding. 2 plies of fiberglass over a micro filler in the cut. Date: 03/01/2014 Views: 10859

next last