Second and final pass of Port top wingskin bond on 5.
Date: 09/13/2010
Views: 2904
DSCN6208
Date: 10/11/2009
Views: 2602
IMG_0268post
Date: 09/17/2010
Views: 4211
Newest Image
EAA SITE
Date: 08/23/2023
Views: 86020
DSCN5990Ann
Thanks to D.Wysong & Giles for some comments on the installation of the spade connectors in the plug. There were two issues. 1, the connectors were inserted with the crimp on the wrong side. 2, the little tab on the back of the connector that holds the connector in the plug were not protruding far enough to catch. By carefully opening the tab and inserting them 180 degrees around, they clicked right into place and held when the plug was attached to the voltage regulator.