I bored this 5/8" Stainless Lock Washers to .785", 11/16" is a wierd size that McMaster didn't offer
Date: 12/16/2013
Views: 7722
25062008124_G
Date: 09/10/2009
Views: 6075
Newest Image
EAA SITE
Date: 08/23/2023
Views: 708551
IMG_2253Ann
Used the metal loops as a template to drill the holes. Began with a drill that just fit the hole in the metal loop. Then drilled the hole open to 1/4" for a tight fit of the rivet nut. Finally, used a large drill to de-burr the hole and clean up the edge.