1/2" ball end-mill on order (McMaster) to to mill a pocket in the brake master cylinder directly above the mounting holes
Date: 12/13/2013
Views: 6813
Newest Image
EAA SITE
Date: 08/23/2023
Views: 693381
IMG_2884Ann
2008 12 20 - Even when you are done, you really aren't done. Was doing airspeed calibrations today and was having problems. Wanted to check the pitot & static connections inside wing root. Pulled the wing and found the problem. Both lines had been crimped badly. Crushed very badly. Cut out the 2 inches (5 cm) of crushed lines. Ordered some tubing connections from McMaster-Carr. Will have to splice in some new tubing. Also need to find out what was the problem crushing the lines.
Tommy says that you are NEVER really finished with your airplane. There's ALWAYS something needing repair, needing maintenance or needing upgrade.
