Panel is warped on right side, will try some heat.
Date: 01/11/2010
Views: 11005
IMG_1104
Date: 03/17/2004
Views: 8096
Europa_tank_breather_bits
Date: 11/01/2001
Views: 7381
Newest Image
EAA SITE
Date: 08/23/2023
Views: 821944
IMG_0384Ann
I ordered a prop from Warp Drive to use temporarily while the Airmaster is being rebuilt. Following the instructions, the angle of the face of the prop hub was measured as exactly 6 degrees off vertical. The blades were then set at 15 degrees to make them 21 degrees when the aircraft is level ( 15 + 6 = 21 )