Panel is warped on right side, will try some heat.
Date: 01/11/2010
Views: 3402
IMG_1104
Date: 03/17/2004
Views: 3533
Europa_tank_breather_bits
Date: 11/01/2001
Views: 3498
Newest Image
EAA SITE
Date: 08/23/2023
Views: 96876
AltEncodeFix00Ann
Started with the altitude encoder cabling. Located suitable lengths of #18 AWG red and black wire. Cut and spliced in sufficient lengths of the red and black wire to allow the power cable to go over the landing gear recess. The signals cable consisted of two 2-conductor shielded wires. I did not have any suitable cable to replace the signals cable so it was added to the ACS shopping list.