|
|
IMGA0626
Hole ready for stall warner
Date: 04/11/2013
Views: 71677
|
|
|
IMGA0634
Shimmed for correct washout
Date: 04/14/2013
Views: 71246
|
|
|
IMGA0635
Rib ready for floxing
Date: 04/14/2013
Views: 73657
|
|
|
IMGA0641
EXOTHERM!! My worst moment yet
Date: 04/16/2013
Views: 72103
|
|
|
IMGA0657
After repair
Date: 04/17/2013
Views: 79951
|
|
|
IMGA0661
Screws through ribs to align blocks.....must remember to remove them before the lay up
Date: 04/17/2013
Views: 93200
|
|
|
IMGA0660
You can see the wash out build into the block
Date: 04/17/2013
Views: 91591
|
|
|
IMGA0664
Scrap bit of foam which will get sanded to match the profile of the block. It takes up the gap between spar and end of the block
Date: 04/17/2013
Views: 101486
|
|
|
IMGA0673
Nicely shaped and blended in. The pipe sticking out runs all the way through the blocks and is to carry the wires from the fuselage to the wing tips for nav/strobe and hopefully landing lights
Date: 04/18/2013
Views: 104681
|
|
|
IMGA0680
These are the rear blocks where the bell cranks sit in. Note the vent holes
Date: 04/18/2013
Views: 113169
|
