|
IMG_0389
Rear Bulk head fixed and peel plyed
Date: 04/10/2015
Views: 7126
|
|
|
IMG_0230
Date: 01/31/2014
Views: 7780
|
|
|
IMG_0406
Date: 04/17/2015
Views: 7560
|
|
|
IMG_0187.JPG (2)
Workshop kitted out. All done in 3 weeks!
Date: 04/13/2014
Views: 9084
|
|
|
DSC00212
Marking position for bracket on rear bulk head
Date: 09/08/2015
Views: 10638
|
|
|
IMG_0251
Kit safely in Storage.
Date: 02/01/2014
Views: 7649
|
|
|
Torque tube
Took some measurements and sent query to Europa. Response was I required the issue 1 TP38s
Date: 09/03/2015
Views: 4637
|
|
|
IMG_0191[1]
Date: 09/12/2015
Views: 7347
|
|
|
IMG_0410
Date: 04/17/2015
Views: 9257
|
|
|
DSC00163
Rudder opened up to accept the push rod bracket. Alas no blue foam as it is the NG model. No instructions on how to proceed. Advice from Europa is to bod in some blue foam is it is not load bearing and is just a bed for the composite.
Date: 09/04/2015
Views: 8593
|
|
|
IMG_0237
Fuselage in the truck
Date: 02/01/2014
Views: 8055
|
|
|
IMG_0235
Date: 02/01/2014
Views: 7737
|
|
|
IMG_0344[1]
Aircraft parts & Documents stored
Date: 09/04/2014
Views: 8429
|
|
|
DSC00215
foam removed to make space for the rudder bracket
Date: 09/09/2015
Views: 7616
|
|
|
DSC00153
Lathe installed
Date: 09/01/2015
Views: 8719
|
|
|
DSC00157
Instructions state that rod should be reamed to 0.375" but it needed to be reamed out 0.428" to fit push rod.
Date: 09/03/2015
Views: 7111
|
|
|
IMG_0823
Same of port side.
Date: 09/03/2015
Views: 6434
|
|
|
IMG_0392
Date: 04/10/2015
Views: 7124
|
|
|
IMG_0228
Andy & I having a good breakfast prior to the start of our trip to South Wales
Date: 01/31/2014
Views: 8267
|
|
|
IMG_0231
Date: 01/31/2014
Views: 8345
|
|