|
|
IMG_6962
Old 1/4 in (6.4 mm) vent on the top. Totally inadequate for the job. New 3/8 in (9.5 mm) vent on the bottom.
Date: 11/13/2013
Views: 6668
|
|
|
IMG_6977
The white stuff you see is low-expansion foam that was squirted in to provide support so this wouldn't happen. Unfortunately, I could not get foam under the port side sufficiently to support that side. That's where the crack developed.
Date: 10/19/2013
Views: 7103
|
|
|
|
109_0910_IMG
Date: 01/05/2004
Views: 5986
|
|
|
DSC_0035
Date: 08/31/2007
Views: 4745
|
|
|
|
IMG_2493
Date: 04/11/2006
Views: 5032
|
|
|
DSCN5968Ann
Date: 05/02/2007
Views: 4209
|
|
|
|
IMG_0021
Date: 05/30/2007
Views: 9261
|
|
|
IMG_1469p
Cleaned up the tunnel area.
Date: 06/05/2011
Views: 4044
|
|
|
|
092902_tailplane
Date: 12/31/1969
Views: 3808
|
|
|
DSCN5510Ann
Date: 02/03/2007
Views: 4914
|
|
|
|
20050219_IMG_0020
Date: 02/19/2005
Views: 3891
|
|
|
DSCN6522
Date: 10/25/2009
Views: 3524
|
|
|
|
2005_DSCF0104_2_1
Date: 02/04/2009
Views: 3931
|
|
|
img0836copy
Date: 07/29/2007
Views: 3074
|
|
|
|
BehrnesEuropa2
Date: 12/03/2005
Views: 4948
|
|
|
DSC00006
Date: 12/31/1969
Views: 9800
|
|
|
|
dsc09024
I was really anal about keeping the socket holes tight. This proved to be more work than it was worth and was fighting the tight fit when it came to locating the axles. Do yourself a favor and just make them a little bigger, 1/8 or so. This gap will be
Date: 01/22/2013
Views: 20493
|
|
|
IMG_0002
Date: 04/27/2007
Views: 4887
|
|
|
|
Ron and Alan took turns working on starboard bracket.
Date: 01/20/2010
Views: 6456
|
|
|
Rudder_the_3
Date: 05/23/2009
Views: 4971
|
|
