The center hole was tapped and used for 1st test mount, a big lightening hole will eliminate it
Date: 11/27/2013
Views: 3669
Fred fitting fairings 8.
Date: 02/15/2009
Views: 3072
09022003163259_G
Date: 12/31/1969
Views: 2642
Newest Image
EAA SITE
Date: 08/23/2023
Views: 99450
IMG_3301post
The issue being the softness and flexibility of the gasket material. Makes it difficult to ensure proper location while reattaching the bowl. The gasket is probably fine for a carb rebuild where you are doing it on the bench and can turn the carb over for work. Doesn't work well upside down on the engine. And both gaskets were similarly damaged. Both were replaced with Rotax gaskets. Engine still didn't run right.