First ply being held flat, then a bit of heat added.
Date: 01/11/2010
Views: 6878
IMG_0248post
Date: 09/14/2010
Views: 5264
Newest Image
EAA SITE
Date: 08/23/2023
Views: 816490
DoorMount26Ann
Pulled the clamps on the port door. The door seemed to fit quite well. Drilled the #12 holes with the hinges bonded in place. Bolted it down and tested it. A tiny bit of abrasive had to be applied to a couple areas to complete the fit. Works very well.