Oops, fixed a dent I made with a C-Clamp when testing spar Adel clamp bracket, Q-Cel, 1 BID and Peel-Ply
Date: 11/30/2013
Views: 3691
DSCN5138
Date: 11/29/1999
Views: 3482
DSC00426
Date: 04/03/2010
Views: 2698
Newest Image
EAA SITE
Date: 08/23/2023
Views: 105467
Port wing 4.
Goiter removal, (seen on prior pict).
Aeropoxy light was applied heavier than you could believe which netted just about right.
Began sanding with 80 grit to about 1/16" thick, then went down to 120 grit, feathered in with 180/320 grit.
It needs an application or two of 3M flowable finishing putty to fill pinholes, voids and deeper sanding marks.
Very pleased with this first pass.
Y9-09-15