Rat Shack high density 15 pin D-sub solder type connector for stick grip switches.
Package says good for 5 amps for up to 1 minute @ 600volts.
It ends up we need 10 wires, not 9. It also ends up art crimped D-sub pins on prior 9 pin install onto #26 wire without folding the wire twice or more and the wires were loose.
OK bite the bullet and rewire with 15 pin connector.
Here you see Art soldered the case together with a 100/140 watt soldering gun, then cut off the ears, filed smooth and soldered the ends together.
Y10-09-29
